Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Rear Lock Carrier Cover, Removing and Installing
Rear Lock Carrier Cover, Removing And Installing
Removing
-
Remove bolts - 1 -.
-
Remove tie-downs - 2 -.
-
Unscrew four plugs - 3 - from threaded pins - 4 - using screwdriver.
-
Unclip upper edges of cover - 6 - arrows - A -.
-
Unclip cover upward from lock carrier.
Installing