Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Trunk / Liftgate Lock Cylinder: Service and Repair
Up To 09/2000
Lock Cylinder Carrier, Removing and Installing (Wagon)
Lock Cylinder Carrier, Removing And Installing (Wagon) --> 09.00
Removing
-
Remove trim for tailgate.
-
Disconnect harness connectors - arrows -.
-
Unclip operating rod - 2 - for tailgate.
-
Remove nuts - 1 -.
-
Remove securing clamp in direction of - arrow - using a screwdriver and hold in place.
-
Remove lock cylinder carrier - 1 - from tailgate and thereby from handle trim.
Installing
-
Engage locking clamp again.
-
Place complete carrier onto handle trim and threaded pins, and engage into handle trim with an audible click.
-
Then proceed in reverse order of removal.
Lock Cylinder, Removing and Installing (Wagon)
Lock Cylinder, Removing And Installing (Wagon) --> 09.00