Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Trim Panel: Service and Repair
A-Pillar Trim
Upper A-Pillar Trim, Removing and Installing
Upper A-pillar Trim, Removing And Installing
Vehicles without head-level airbag
1
-
Trim
-
Unclip trim, starting at top.
-
Remove trim upward.
2
-
Sleeve
-
4x
3
-
Clip
-
4x
4
-
Gasket
-
after assembling trim, make sure seal is properly fitted
Vehicles with head-level airbag
NOTE: Upper A-pillar trim must be replaced after removal as it cannot be removed without being destroyed.