Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Trim Panel: Service and Repair
Luggage Compartment Trim
Luggage Compartment Trim, Removing and Installing
Luggage Compartment Trim, Removing And Installing
Removing
NOTE: The illustrations cover only the right side of the vehicle, the left side of the vehicle is the mirror image.
-
Remove lock carrier.
-
Remove right backrest for rear seatbench.
-
Switch ignition off.
-
Loosen hex nut - 2 - and remove lock bolt - 3 -.
-
Pull upholstery - 1 - in upper area out of clip - 4 -, press lower tab - 6 - to rear from sill panel - 7 - and remove upward with tab - 5 -.