Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Power Seat Motor: Service and Repair
Backrest Motor With Transmission, Removing and Installing
Backrest Motor With Transmission, Removing And Installing
Removing
-
Remove Recaro seat.
-
Remove belt buckle.
-
Remove trim, backrest mounting bracket.
-
Remove spring cover.
-
Remove side seat trim.
-
Remove backrest.
-
Remove side airbag.
-
Remove cover and upholstery from backrest.
-
Remove backrest shell.
-
Remove spring washer - 4 - from shaft - 3 - - (see magnified area A) -, using screwdriver.
-
Pull shaft - 3 - far enough out of backrest frame - 1 - so that backrest motor - 2 - can be removed.
-
Disconnect harness connector - 8 -.
-
Unthread bolt - 5 - out of threaded bushing - 6 - and remove plastic washers - 7 - and backrest motor - 2 - out of backrest frame - 1 - - (see
magnified area B) -.
Installing
Installation is the reverse order of removal.