Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Specification (full throttle above 4100 rpm):
-
Press (arrow) key.
-
Press keys O and 6 for function "End output" and confirm entry with the Q key.
-
Switch ignition off.
If in display zone 3 and/or 4 a value between 6.0 and 16.0 is displayed, the following fault may be present:
The camshaft adjustment solenoid valve switches the oil pressure correctly to the relevant mechanical camshaft adjuster, but it cannot reach its final
position (e.g. because it is tight/binding).
-
Replace camshaft adjuster(s).
If no adjustment is shown in display zone 3 and/or 4:
-
Replace camshaft adjuster(s).