Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Camshaft Oil Seal: Service and Repair
Replacing
Special tools and equipment
-
2085 Oil seal extractor
-
3240 Oil seal extractor
-
3241 Fitting sleeves
-
VAG 1331 Torque wrench (550 Nm)
-
VAG 1332 Torque wrench (40-200 Nm)
Removing oil seal on camshaft sprocket
-
Remove toothed belts.
-
Remove camshaft sprockets.
-
Unscrew inner part of oil seal extractor 3240 two turns (approximately 3 mm) out of outer part and lock in position with knurled screw.