Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Catalytic Converter: Service and Repair
Exhaust Manifold, Front Exhaust Pipe and Catalyst
Exhaust Manifold, Front Exhaust Pipe and Catalyst
1. Oxygen
-
Sensor (02S) 2 Behind Three Way Catalytic Converter - G131-*, 50 Nm
-
Cylinder bank 2
-
Grease only the threads with "G5"; "G5" must not get into the slots on the sensor body
2. 4-pin connector
-
Brown
-
Secured to bulkhead
-
For Oxygen Sensor (02S) 2 Behind Three Way Catalytic Converter G1 31 -and Heated Oxygen Sensor 02S) -Z30-, cyl. bank 2
3. To front muffler
4. Front left exhaust pipe "/catalyst
5. Heated Oxygen Sensor (HO2S) 2 G108*, 50 Nm
-
Grease only the threads with G511; G511 must not get into the slots on the sensor body
6. 4-pin connector
-
Black
-
Secured to bulkhead
-
For Heated Oxygen Sensor (H02S) 2 -G108-* and Oxygen Sensor (02S) Heater -Z28-, bank 2
7. 25 Nm
8. Cover cap, 10 Nm
9. Connection
10. Upper heat shield