Passat Syncro Wagon V6-2.8L (ATQ) (2000)
If the specifications are not attained:
-
Check DTC memory:
If the specification is obtained:
-
Maintain engine speed further at 1800-2200 rpm.
-
Press key 3 on VAG 1551 or up arrow on VAG 1552.
Indicated on display: (1-4 = Display zones)
System in basic setting 47
->
1
2
3
4
-
Maintain engine speed at 1800-2200 rpm until display in display zone 4 jumps from "Test OFF" to "Test ON".
-
Maintain engine speed further at 1800 - 2200 rpm until specification "Cat B2 OK" is displayed in display zone 4.
Note:
The catalyst diagnosis takes approximately 60 seconds.
Display zones