Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Remove bolts (TORX T15) -arrow A-.
-
Carefully unclip operating rod -2- from lever - arrow B- using a screwdriver.
-
Turn operating rod -2--arrow C- and remove motor -1-.
-
Disconnect electrical connector.
-
Remove motor.
Installing and adjusting
-
Initiate Basic setting, Function 04, with VAG 1551 Scan Tool (ST); Climatronic On Board Diagnostic (OBD).
Footwell/defroster flap motor -V85-, removing and installing
Removing
-
Remove Instrument panel
-
Loosen Instrument panel cross member.
For the next steps, an assistant must lift and hold the heater/evaporator unit.