Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Headlamp Switch: Service and Repair
Light Switch -E1-, Removing And Installing
Removing
-
Turn rotary switch to "O" position.
-
Firmly push rotary switch inwards -arrow 1- and turn slightly to right -arrow 2-.
-
Hold rotary switch in this position and pull entire switch from opening in instrument panel trim -arrow 3-
-
Return rotary switch to "O" position.
-
Disconnect electrical connector.
Installing
-
Connect electrical connector to switch.
-
Hold switch housing firmly, push rotary switch inwards -arrow 1- and turn slightly to right -arrow 2-.
-
Hold rotary switch in this position and insert entire switch into opening in instrument panel trim -arrow 3-
-
Return rotary switch to "O" position to engage.