Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Headlamp Alignment Sensor: Service and Repair
Left Rear Level Control System Sensor -G76-
Left Rear Level Control System Sensor -G76- Removing And Installing
Sensor is mounted to left rear suspension and is not externally adjustable.
Removing
-
Remove screw -1-, Torx screws -arrows- and remove rear suspension cover.
-
Disconnect electrical connection -2- at sensor.
-
Remove hex bolt -1- (counter-hold at bolt/joint -4-) .
-
Remove Torx screws -3- and remove sensor.
Installation
Installation is in reverse order of removal.
-
Check headlight aim.
-
Bring headlight into basic setting