Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Tail Lamp: Service and Repair
Up To 10.00
Rear Light Bulb Holder, Removing And Installing
NOTE: Apart from the different access required, removing and installing the rear light bulb holders on sedan and wagon models is the same.
Removing
-
Fold luggage compartment trim behind rear light to side (sedan) or open rear light side storage compartment flap (wagon).
-
Disconnect electrical connector.
-
Depress retainer tabs -arrows- and remove bulb holder to rear.
Installing
Install in reverse order of removal.