Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Remove drain plug -arrow 1-.
-
Drain ATF.
-
Tighten new drain plug -arrow 1-. (40 Nm)
-
Remove ATF inspection plug -arrow 2-.
-
Guide V.A.G 1924 in through an opening -arrow- in the deflector cap, taking care not to push the deflector cap upward out of position.
-
Fill with ATF until ATF comes out of inspection hole.
-
Shift selector lever into "P" position.
-
Start engine.
-
Press brake pedal.
-
Shift through all selector lever positions with vehicle stationary, leaving selector lever in each position for about 10 seconds.
-
Shift selector lever into "P" position.
-
Check and top up ATF level, See: Testing and Inspection