Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Select diagnostic function:
At this point all diagnostic functions are available.
-
Press desired function on display.
NOTE: For additional Steps, see repair procedures.
On Board Diagnostic (OBD), Initiating
On Board Diagnostic (OBD), initiating
NOTE: The following description refers only to the VAG 1551 Scan Tool (ST).
Connecting VAG 1551 Scan Tool (ST) and selecting functions (checking module version)
NOTE: Connect Scan Tool (ST).
-
Switch on ignition.
Indicated on display:
VAG - On Board Diagnostic (OBD)
HELP
1- Rapid data transfer*
2- Blink code output*
* Two operating modes are displayed alternately
-
Press button -1- to select "Rapid data transfer" operating mode 1.
Indicated on display:
Rapid data transfer
HELP
Enter address word XX
-
Press buttons -1- and -7-. "17" is the address word for "instrument cluster".
-
Press -Q- button to confirm input.
-
Press -> button.
Indicated on display:
3B0920845 COMBI + IMMO. VDO X07
->
Coding 21115 WSC 00000
-
Upper line
Part number of control module3), System identification (Instrument cluster), Manufacturer VDO See VDO Version
number
-
Bottom line
Coding number1), Work Shop Code2)
1) Depends on engine, transmission and optional equipment
2) Automatically stored in the control module upon entry into the installed system. But not for coding of control modules that have already been
used.
-
Press -> button.
Indicated on display:
WVWZZZ70Z1H000054 VWZ1ZOX0264600 ->
-
Upper line
Vehicle Identification Number (VIN), ( 17-digit, WVW....) Identification number, ( 14-digit, VW....)
-
Press -> button.
Indicated on display: