Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Open fuel filler cap to relieve tank pressure
-
Use VAS 5190 or equivalent to siphon fuel from tank
-
Disconnect 4-pin connector from fuel sending unit -arrow-.
-
Move exhaust clamp between downpipe and tailpipe rearward to allow exhaust to move freely, then remove exhaust from center and rear hangers
to remove exhaust from the vehicle
-
Secure drive shaft using a wire or equivalent otherwise the constant velocity joint can be damaged
NOTE:
Ensure drive shaft is secure to avoid damage to the constant velocity joint which is not covered under this action
-
Remove rear wheels
NOTE: