Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Cruise Control Module: Service and Repair
Cruise Control System (CSS) W/O Electronic Power Control (EPC)
Cruise Control System (CSS) On Vehicles Without Electronic Power Control (EPC), Servicing
CAUTION!
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio.
Cruise control, control module -J213-, removing and installing
The cruise control, control module -J213- is located behind the airbag unit on front passenger's side.
Removing
-
Remove glove box
-
Disconnect electrical connector
-
Remove screw -4-.
-
Pull control module -3- out of retainer lip -inset- and remove.
Installing:
-
Insert control module -3- bracket tab into retainer lip -inset-.
-
Install screw -4-.
-
Reconnect electrical connector