Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Burn spots from cigarettes or similar
One side of belt edge deformed or area of belt edge is wavy
Automatic Retraction (Stop Function), Checking
Check automatic retraction (stop function)
Automatic belt retractor has two locking functions.
-
The first locking function is triggered by quick unrolling of the belt from the automatic belt retractor (belt extraction acceleration).
Test
-
Pull belt out of automatic belt retractor with firm jerk.
-
No locking effect - replace seatbelt complete with belt latch.
-
If there are malfunctions when belt is extracted or retracted, next check whether position of automatic retractor has changed.
-
Second locking function is initiated by change in vehicle movement sequence (vehicle-dependent locking function).
Test
-
Fasten seatbelt.
-
Accelerate vehicle to 20 km/h and then perform full braking using foot brake.
-
Replace seatbelt complete with belt latch if seatbelt is not locked by locking mechanism during braking procedure.
CAUTION! For safety reasons, road test should be performed in traffic-free area to ensure that other motorists/pedestrians etc. are not
endangered.
Belt Latch, Visual Check
Belt latch, visual check