Passat Syncro Wagon V6-2.8L (ATQ) (2000)
^
Position of fuel level sending unit cover is correct when arrow -1- on cover is aligned with arrow -2- on fuel tank.
Note:
Black arrow references forward position of the vehicle.
^
Reinstall locking ring using the 3087 wrench and tighten to 120 Nm (89 ft lbs.).
^
Reconnect 4-pin harness connector.
^
Reinstall fuel supply and return lines using (2) new clamps (N 101 969 01) using the YA 3080 crimping tool or equivalent.
^
Proceed to Section D
Section D - Installation of Fuel Sending Unit (Loc. -G169-)
^
Carefully disengage 2-pin harness connector -1- and disconnect connector.