Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Use auxiliary wires from VAG 1594 to connect multimeter with terminals 3 + 4 (connector going to Motronic control module) to make voltage
measurement, and measure primary voltage.
Specification: 0.40-0.50 V
-
Unplug 4-pin harness connector going to corresponding Heated Oxygen Sensor (HO2S):
Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) -G131-, bank 2 4-pin harness connector (brown) (arrow).
-
Use auxiliary wires from VAG 1594 to connect multimeter with terminals 3 + 4 (connector going to Motronic control module) to make voltage
measurement, and measure primary voltage.
Specification: 0.40-0.50 V