Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Insert steel Wire (approx. 1.2 mm diameter) in drilling next to ignition key -arrow-.
Steering lock must be dismantled if the steel Wire cannot be guided into the drilling correctly.
-
Release lock cylinder securing lever using Wire -arrow- and remove lock cylinder from steering lock housing.
1
-
Lock cylinder
2
-
Wire (approx. 1.2 mm diameter)
3
-
Securing lever
Installing
-
Insert ignition key in lock cylinder and turn to position "ON".
-
Release securing lever using Wire (approx. 1.2 mm diameter) and insert lock cylinder into steering lock housing.