Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Electrical Check
The transmission control module is located in front of the right-hand seat under the carpet in footwell.
-
Switch ignition off, release multi-pin connector in direction of arrow, and pull off transmission control module.
-
Connect multi-pin connector to the test box V.A.G 1598/20 -1-, by swinging in -2- and then lock -3-.
Using test box V.A.G 1598/18 the wiring can be checked according to wiring diagram.
After electrical checks
-
Connect multi-pin connector to transmission control module -J217- connector housing -1-, by swinging in -2- and then lock -3-.
Control module -J217- multi-pin connector (88 pin) assignment (sockets on V.A.G 1598/20)