Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Align clutch pedal/brake pedal pivot pin so that it protrudes from mounting bracket on clutch pedal side (arrow).
-
Press clutch pedal onto stop and insert over-center spring in its seat on clutch pedal.
-
Now put clutch pedal in the pivot pin and push it to the left until securing clip cam be attached
-
Connect master cylinder to clutch pedal and engage securing clip for pin in clutch pedal
-
Do not tighten bolt -arrow 2- until both securing clips -arrow 1- for clutch pedal; clip for brake pedal (not visible) have been installed on the clutch
pedal/brake pedal pivot pin.
-
Adjust clutch pedal switch above clutch pedal.