Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Windshield Moulding / Trim: Service and Repair
Water Deflector, Assembly Overview
NOTE:
-
Description applies to left side. Right side is derived accordingly from this.
-
Installation of water deflector minimum 5 hours after installing retaining strip.
-
Remove protective foil only immediately prior to installing. Processing temperature approx. 68° F (20° C).
-
Bonding surfaces must be dry and free from dust and grease.
1
-
water deflector
-
Removing:
-
Remove water deflector from plenum chamber cover - 4 - starting at retaining strip - 2 -.
-
Installing:
-
Place water deflector on roof and clip into retaining strip - 2 - from top to bottom.
2
-
Retaining strip
-
self adhering
-
Installing:
-
Remove protective foil - 3 -, position retaining strip on inner roof bracing and press on forcefully.
3
-
Protective foil
-
For adhesive tape of retaining strip.
4
-
Plenum chamber cover