Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Wiper Motor: Service and Repair
Rear Window Motor, Removing And Installing
Rear Wiper Motor, Removing
Wiper Arm, Removing
NOTE: Before removing wiper arm, ensure that wiper motor is in park position. This ensures proper wiper arm/blade park position when reinstalling.
-
Pry off wiper arm cap -arrow- with a screwdriver.
-
Loosen M8 nut -arrow-, but do not remove completely.
-
Lift wiper arm lightly until it releases from tapered shaft.
-
Remove nut completely and remove wiper arm.
-
Remove inner trim from rear hatch
Rear wiper motor, removing
-
Disconnect electrical connector -1 - from wiper motor.
-
Pull off hose -2- to washer jets.
-
Remove M10 hex bolts -arrows- and remove wiper motor.
Rear wiper motor, installing