Overview of Front Bumper Cover Assembly for Passat Syncro Wagon (1998)
Front Bumper Cover / Fascia: Service and Repair
Front Bumper Cover, Removing and Installing
Front Bumper Cover, Removing And Installing --> 09.00
Removing
-
Remove turn signals. See: Lighting and Horns/Turn Signals/Turn Signal Lamp/Service and Repair
-
Remove release lever -15- from hood latch. See: Doors, Hood and Trunk/Hood/Hood Latch Release/Service and Repair
-
Remove bolts -9-, -10- and -14-.
-
Remove bumper cover -1- from guide pieces -4- (left and right sides) parallel, with a second mechanic.
-
Disconnect harness connectors of installed electrical components and hoses.
Installing
Installation is reverse of removal.
-
Make sure gaps are parallel and gap dimensions.