Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Guide Assembly tool T 10118 into door through opening in inner door plate.
-
Illuminate inner part of door using a flashlight for better view.
-
Hook assembly tool into spring - arrow A -.
-
Engage spring into door lock by pulling Assembly tool T 10118 - arrow B -.
Activation lever is now locked.
-
Swivel door handle into door.
-
Insert clip - 1 - for lock mechanism lever - 3 - into metal cut out and engage into door handle - 2 -.
NOTE: During installation, door handle - 2- must be pressed onto door plate.
Installing lock cylinder housing.
-
A function test must be performed with door opened, since door cannot be opened if adjustment and clips of Bowden cable are not correct.