Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
Passengers Side Front Door Trim, Removing And Installing
Removing
-
Switch ignition off.
NOTE: Place scraping blade - 2 - or similar tool between screwdriver and door trim to avoid damage on door trim.
-
Insert screwdriver (max. 5 mm wide) into hole on underside of inside door handle - arrow -, rotate and pry out panel - 1 -.
-
Remove bolts - 1 - and - 2 -.
NOTE: Inside door handle - 3 - is bolted to door trim and can only be removed when door trim is removed.