Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Unclip door sill trim - 1 - from front unto behind B-pillar.
-
Remove hex bolt (40 Nm) - 2 -.
-
Remove belt end fitting - 3 -.
-
Unclip trim -- from B-pillar at sides first, then in upper area.
-
Remove seatbelt -- from trim.
-
If clamps -- remain in body when unclipping trim, clamps must be pressed using needle-nose pliers, to avoid damages. Carefully remove clamps
from body, using pliers.
Installing