Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
Display Group 4
-
Start engine and let run at idle.
Temperature value must increase evenly.
If displayed values are NOT OK:
-
Press -> button.
-
Press buttons -0- and -6- to select "End Output" function 06, and press -Q- button to confirm input.
-
Switch ignition off.
-
Replace Engine Coolant Temperature (ECT) sensor -G62-.
NOTE:
-
Temperature is displayed in increments of 1.5 °C.
-
If malfunctions occur within certain temperature ranges while the engine is running, and the temperature values do not increase without
interruption, the temperature signal is intermittently interrupted and the sensor must be replaced.
Evaluation of display group 4, display field 3
Continuation of check when display reads approx. - 46 °C: