Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Lubricate threaded head of oil seal extractor, place it in position and exerting firm pressure screw it as far as possible into oil seal.
-
Loosen knurled screw and turn inner part of extractor against camshaft until oil seal has been extracted.
Installing
-
Fit guide sleeve 3241/2 onto camshaft journal.
-
Slide dry seal over guide sleeve.
-
Press seal flush into cylinder head with press sleeve 3241/1 and the bolt 3241/6.
The rest of the assembly is basically a reverse of the disassembly sequence.
Installing toothed belt and adjusting timing.