Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
/Page-1065002.png)
If displayed values are OK:
-
Press -> button.
-
Press buttons -0- and -6- to select "End Output" function 06, and press -Q- button to confirm input.
-
Switch ignition off.
-
Check readiness code .If Diagnostic Trouble Code (DTC) memory has been erased, or ECM has been disconnected, generate new readiness code.
See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
Evaluation of display groups 22, 23, 24
Continuation:
Resistances and wiring, checking
