Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
Wiring Test". See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Scan Tool Connecting/With Generic Scan Tool/Test
Box, Connecting For Wiring Test
-
Check wires between test box and 4-pin connector to Engine Control Module (ECM) for open circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohms
Vehicles with engine code AHA
Vehicles with engine code ATQ
Continuation for all vehicles
-
Also check wires for short circuit to B+ or Ground (GND).
Specified value: Infinity Ohms
If no malfunctions are found in wires:
-
Replace Motronic Engine Control Module (ECM) -J220-.
With Manufacturer's Scan Tool
Heated Oxygen Sensor (HO2S) and Oxygen Sensor (O2S) control before TWC, checking
Special tools and equipment
-
VAG1551 or VAG1552 Scan Tool (ST) with VAG1551/3 adapter cable
-
VAG1598/22 test box
-
Multimeter US1119 (Fluke 83 or equivalent)
-
VW1594 connector test kit
-
Wiring diagram
Checking conditions
-
Engine coolant temperature at least 85°C (185°F) See VAG1551 scan tool function 08, display group 004, display field 3