Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
For bank 1, sensor 1
29
-
Harness connector
-
4-pin connector,green
-
For Oxygen Sensor (O2S) behind Three Way Catalytic Converter (TWC) - G130- and Oxygen Sensor (O2S) heater -Z29-
-
Location, See: Fuel Delivery and Air Induction/Locations
-
For bank 1, sensor 2
30
-
Fuel rail with fuel injectors
-
Disassembling and assembling, See: Fuel Delivery and Air Induction/Fuel Rail/Service and Repair
31
-
Fuel supply line
-
Black
-
From fuel filter:
32
-
Fuel return line
-
Blue
-
Secure with spring- type clamps
-
Check for secure seating
-
To the fuel delivery unit in fuel tank
33
-
Engine - Coolant Temperature (ECT) sensor -G62-*
-
Blue
-
For ECM
-
With coolant temperature gauge sensor -G2-
-
Checking, See: Coolant Temperature Sensor/Switch (For Computer)/Testing and Inspection
-
Before removing, release pressure from cooling system
-
Resistance graph, See: Coolant Temperature Sensor/Switch (For Computer)/Testing and Inspection
34
-
Harness connector
-
4-pin connector, blue
-
For Engine Coolant Temperature (ECT) sensor -G62-
35
-
Retaining clip
-
Check for secure seating
36
-
Harness connector
-
2-pin connector, green
-
For Secondary Air Injection (AIR) solenoid valve -N112-
37
-
Harness connector
-
2-pin connector, blue
-
For Intake Manifold Tuning (IMT) valve -N156-