volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 3941 > < With Manufacturer's Scan Tool
Page 2
background image

-

Disconnect vacuum hose from fuel pressure regulator (arrow).
The fuel pressure must increase to approx. 4.0 bar (58.8 psi).

-

Switch ignition off.

-

Check for leaks and residual pressure by observing pressure drop on gauge.
After 10 minutes there must be a residual pressure of at least 2.0 bar (29.4 psi).

If the residual pressure drops below 2 bar (29.4 psi):

-

Start engine and let idle.

-

Switch ignition off after pressure has built- up.

-

Close shut off valve on VAG1318 pressure tester.
The lever is perpendicular to direction of flow.

-

Observe pressure drop on gauge.

If the pressure does not drop:

-

Check the check valve in electric fuel pump.

If the pressure drops again:

With Manufacturer's Scan Tool|Page 3941 > < With Manufacturer's Scan Tool