Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Disconnect negative GND terminal -arrow- from battery negative (-) post.
-
Then disconnect positive B+ terminal from battery positive (+) post.
-
Remove M8 x 25 bolt -arrow-.
-
Remove battery hold-down bracket.
-
If present, disconnect central gas vent hose from top cover.
-
Carefully lift battery from plenum.
Installing
NOTE: New generation batteries are equipped with a central gas venting system and integrated flame trap -arrow-. Function: Gases produced during