Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Remove steering gear mounting bolts -1-, -2- and -3-.
-
Remove steering gear through left-hand wheel housing (second technician required).
Installing
Before installation the steering gear must be centralized with VAG 1907:
Note: It is also possible to centralize an installed steering gear but the access to do so is limited.
-
Remove socket head bolt -1- on steering gear.
-
Move rack until center marking on rack (arrow) and threaded hole -2- align.
-
Thread in VAG 1907
-
Position steering gear on plenum chamber.