Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
Steering Wheel: Reading and Clearing Diagnostic Trouble Codes
Erasing DTC Memory
DTC Memory, Erasing
NOTE: Erasing DTC memory (function 05) is only possible after checking DTC memory (function 02). If DTC memory cannot be erased, check DTC
memory again and rectify indicated malfunctions.
Prerequisites
-
Check DTC memory.
-
All malfunctions repaired.
After checking DTC memory:
Readout in display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -5- to select function 05, "Erase DTC memory".
Readout in display
Rapid data transfer
Q
05 Erase DTC memory
-
Press -Q- button to confirm input.
Indicated on display: (DTC Memory is erased)
Rapid data transfer
->
DTC memory is erased!
-
Press -> button.
Indicated on display (select function):
Rapid data transfer
HELP
Select function XX
-
End Output (Function 06)
NOTE:
-
If this appears in the display, the test sequence is faulty.
WARNING!
DTC memory was not checked
-
If this appears in the display, the test sequence is faulty.
Rapid data transfer
->
DTC memory was not checked
-
Adhere exactly to test sequence: First check DTC memory, repair malfunctions if necessary, then erase.
End Output (Function 06)
End Output (Function 06)
-
Press buttons -0- and -6- to select function "End output".