Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
/Page-1948004.png)
-
Insert clevis of suspension strut onto support control arm. Tighten nut -1- to 90 Nm (66 ft. lbs.).
-
Install both upper control arms to swing arm. Tighten nut -2- to 40 Nm (30 ft. lbs.).
Note: When tightening, press upper arm downward as far as possible
-
Install ABS wheel speed sensor wiring into retainer on brake caliper.
-
Install wheel.
