Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Suspension strut, removing and installing
Removing
-
Remove wheels.
-
Remove rubber grommets in plenum chamber -arrows-.
-
Unbolt suspension strut at body.
1. Nuts
-
Pull ABS wheel speed sensor wiring out of retainer on brake caliper.
-
Remove nut -1-.
-
Remove bolt and pull arms -2- out upward.
-
Move swing arm/wheel bearing housing in direction of arrow away to side.
CAUTION:
^
The slits in the swing arm/wheel bearing housing must not be widened using a chisel or similar tool.
^
Do not loosen bolts -3- and - - or the wheel alignment must be rechecked.