Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Check adjustment of switch -1- over clutch pedal as follows:
Switch -1- must contact clutch pedal -4-.
Required play -a- at switch -1- must be a maximum of 0.5 mm.
Securing clip -2- should contact mounting bracket -3-. A maximum of 0.5 mm gap -b- is permitted.
-
To adjust switch, you must hold securing clip and turn switch.
Notes:
During adjustment, the clutch pedal must not be operated.
To make sure sufficiently secure seating, a switch may be lifted only one time.
Installing new clutch switch
-
Clutch pedal is not operated.
-
Press switch -1- into mounted securing clip -2- to stop against clutch pedal.
-
Check and adjust clutch pedal switch.
-
Attach connector