Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
/Page-1583001.png)
Drive/Propeller Shaft: Adjustments
Drive shaft, adjusting
Special tools and equipment
^
3139/3 Spacers
^
3298 Alignment fixture
^
VAG1331 Torque wrench
Procedures
-
Remove rear section of exhaust system.
-
Remove heat shield from vehicle underbody.
-
Install 3298 alignment fixture with 3139/3 spacers and tighten plastic nuts.
