Passat Syncro Wagon V6-2771cc 2.8L DOHC (AHA) (1998)
-
Make sure that marks on drive shaft flange (arrow -A-) and on transmission or rear final drive (arrow -B-) are in line.
-
Install rear section of exhaust system. Refer to Exhaust System.
Tightening torques
Intermediate bearing to body 25 Nm (18 ft. lbs.)
Drive shaft to transmission 55 Nm (41 ft. lbs.)
Drive shaft to rear final drive 55 Nm (41 ft. lbs.)
Protective plate -B- to transmission (arrows) 25 Nm (18 ft. lbs.)