Passat Wagon L4-1.9L DSL Turbo (AAZ) (1996)
Seat Belt Tensioner: Service and Repair
Removal and Installation With Tensioning Unit
WARNING: ALWAYS follow the prescribed work sequence for removing or installing the belt refractor.
1 - Belt retractor
2 - Lock nut
-
Tightening torque: 23 Nm (17 ft lb)
3 - Tensioning unit
4 - Cable channel/mounting for tensioning unit
5 - Hex bolt
-
Tightening torque: 40 Nm (30 ft lb)
6 - Retaining slots
-
Engage with mounting lugs to determine belt retractor mounting position
Removing:
-
Remove upper and lower B-pillar trim and sill plate trim,
-
Loosen lock nut -2-, which makes tensioning unit inactive.
-
Remove belt retractor -1-.
-
Pull tensioning unit -2- out of guide -arrow- in bracket -4-.
CAUTION:
-
Installation is performed in reverse order of removal.
-
ALWAYS follow the prescribed work sequence.