Passat Wagon L4-1.9L DSL Turbo (AAZ) (1996)
Clutch: Service and Repair
One-Way Clutch, A/T
01M Transmission
NOTE: Refer to Planetary Gearbox Disassembly/Assembly
COMPONENT NOTES AND INFORMATION
1
Circlip
-
For supporting tube -B2-
2
Circlip
-
For free wheel
3
Free wheel with -B1- piston
-
Before removing free wheel, remove Valve Body And Sealing Plugs, refer to Remove/Install
-
Disassembling and assembling, refer to Disassemble/Assemble
4
Dished spring
-
Install with convex side facing free wheel
5
Pressure plate -B1-
-
Install with flat side facing plates
-
Differing thicknesses depending upon number of inner plates installed:
Transmission with 4 inner plates: 13.5 mm
Transmission with 5 inner plates: 10.5 mm
6
Inner plate, -B1-
-
Quantity of inner plates -B1-. See: Application and ID
-
Before installing place plates in ATF for 15 minutes
7
Outer plate, -B1-
-
Quantity of inner plates -B1-. See: Application and ID
8
Shim
-
Determining thickness, refer to Adjusting Reverse Gear Brake -B1-. See: Adjustments
9
Transmission housing with planet carrier in stalled
096 Transmission
FREE WHEEL AND REVERSE GEAR BRAKE - B1-