Passat Wagon L4-1.9L DSL Turbo (AAZ) (1996)
/Page-773002.png)
Fig. 1 Shift lever boot, removing
-
Turn boot inside out.
-
Pry off spring collar with screwdriver.
-
Remove retaining collar.
Fig. 2 Shift lever boot, installing
-
Turn boot inside out.
-
Insert collar -A- and clamp boot with retaining collar -B-.
Installation position:
Shoulder on retaining collar faces toward spring collar.
-
Install shift knob and clip spring collar -C- into shift knob inner groove.
-
Install boot over rubber cover to frame.
