Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Caliper Piston Removing
1. Force piston out of caliper housing with compressed air.
CAUTION: Place a wooden block in the caliper to prevent damage to the piston.
WARNING: Use only enough air pressure to force the piston out.
Caliper Seal Removing
2. Carefully remove piston seal using VAG 1474/5.
CAUTION: When removing, use care to ensure that the cylinder bore is not damaged.
Installation
Piston Dust Seal Installing
1. Install dust cap onto piston.
2. Install new piston seal into housing.
Piston Into Caliper Installing