Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Brake Drum: Service and Repair
Component Notes And Information
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
1
Grease cap
-
Always replace
2
Cotter pin
3
Locking ring
4
Nut
-
For adjusting wheel bearing play, refer to Steering and Suspension
5
Thrust washer
6
Outer wheel bearing
7
Rotor for wheel speed sensor
-
Only on models with ABS
8
Brake drum
-
Diameter: 230mm
-
Wear limit: 231.5mm
9
Stub axle
10. Hex socket head bolt
-
Tighten to: 10 Nm (7 ft lb)
11. Wheel speed sensor
-
Only on models with ABS
12
Backing plate with brake shoes
13
Dished washer
-
Large contact surface faces backing plate
14
Hex bolt
-
Tighten to: 60 Nm (44 ft lb)
Removal
1. Remove wheel.