Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Auxiliary Shaft Seal: Service and Repair
LEGEND
1
Auxiliary Shaft Oil Seal
2
Woodruff Key
3
Bolt
4
Front Sealing Flange
5
Gasket
6
Cylinder Block
7
Bolt
8
Flywheel/Drive Plate
9
Bolt
10
Intermediate Plate
11
Sealing Flange With Oil Seal
12
Front Crankshaft Oil Seal
13
Auxiliary Shaft
14
O-ring
15
Sealing Flange For Auxiliary Shaft
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
COMPONENT NOTES
Auxiliary Shaft Oil Seal (1)
-
Remove to remove sealing flange.
-
Install using installer tool No. 10-203, or equivalent.
-
Lightly oil sealing lip, do NOT use grease.
Woodruff Key (2)
-
Ensure tight fit.
Bolt (3)
-
Tighten to: 25 Nm (18 ft. lbs.).
Gasket (5)
-
Always replace.
Bolt (7)