Passat Wagon L4-1.9L DSL Turbo (AHU) (1997)
Note: A/C system must be discharged before removing components marked with an asterisk (*)
1
Heater, A/C fuse (S 23)
2
A/C relay (J 32)
3
Seal *
4
Heater core *
-
install seals around perimeter of heater core so there are no gaps
-
if heater core does not lock into place during installation, fasten to heater box using screws through the tabs on top of the heater core.
-
after removing heater core, drain entire cooling system and refill with new coolant.
5
Connecting duct
-
with seal
6
Evaporator housing *
-
with evaporator
7
Air intake *
-
with fresh air/recirculating flap
8
Fresh Air Blower Series Resistance (N 24)
9
Fresh air/recirculating flap vacuum servo *
10
Fresh air blower switch (E 9)
11
A/C switch (E 35) with A/C indicator light (K 84)
12
Vacuum hose *
-
vacuum hose layout, refer to Heating and Air Conditioning, Vacuum and Vapor Hose Diagrams. See: Diagrams/Vacuum and Vapor Hose
Diagrams